/*
* This file is part of fastboot 3DS
* Copyright (C) 2017 derrek, profi200, d0k3
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "types.h"
#include "firmwriter.h"
#include "fs.h"
#include "fsutils.h"
#include "arm11/menu/bootslot.h"
#include "arm11/menu/menu_color.h"
#include "arm11/menu/menu_fsel.h"
#include "arm11/menu/menu_func.h"
#include "arm11/menu/menu_util.h"
#include "arm11/hardware/hid.h"
#include "arm11/hardware/i2c.h"
#include "arm11/console.h"
#include "arm11/config.h"
#include "arm11/debug.h"
#include "arm11/fmt.h"
#include "arm11/firm.h"
#include "arm11/main.h"
#define PRESET_SLOT_CONFIG_FUNC(x) \
u32 menuPresetSlotConfig##x(void) \
{ \
return menuPresetSlotConfig((x-1)); \
}
u32 menuPresetNandTools(void)
{
u32 res = 0xFF;
if (!configDataExist(KDevMode) || !(*(bool*) configGetData(KDevMode)))
res &= ~((1 << 2) | (1 << 3)); // disable forced restore and firmware flash
return res;
}
u32 menuPresetBootMenu(void)
{
u32 res = 0xFF;
for (u32 i = 0; i < N_BOOTSLOTS; i++)
{
if (!configDataExist(KBootOption1 + i))
{
res &= ~(1 << i);
}
}
return res;
}
u32 menuPresetBootConfig(void)
{
u32 res = 0;
for (u32 i = 0; i < N_BOOTSLOTS; i++)
{
if (configDataExist(KBootOption1 + i))
{
res |= 1 << i;
}
}
if (configDataExist(KBootMode))
res |= 1 << N_BOOTSLOTS;
return res;
}
u32 menuPresetSlotConfig(u32 slot)
{
u32 res = 0;
if (configDataExist(KBootOption1 + slot))
{
res |= (1 << 0);
res |= (configDataExist(KBootOption1Buttons + slot)) ? (1 << 1) : (1 << 2);
}
else
{
res |= (1 << 3);
}
return res;
}
PRESET_SLOT_CONFIG_FUNC(1)
PRESET_SLOT_CONFIG_FUNC(2)
PRESET_SLOT_CONFIG_FUNC(3)
PRESET_SLOT_CONFIG_FUNC(4)
PRESET_SLOT_CONFIG_FUNC(5)
PRESET_SLOT_CONFIG_FUNC(6)
PRESET_SLOT_CONFIG_FUNC(7)
PRESET_SLOT_CONFIG_FUNC(8)
PRESET_SLOT_CONFIG_FUNC(9)
u32 menuPresetBootMode(void)
{
if (configDataExist(KBootMode))
{
return (1 << (*(u32*) configGetData(KBootMode)));
}
return 0;
}
u32 menuSetBootMode(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) term_con;
(void) menu_con;
u32 res = (configSetKeyData(KBootMode, ¶m)) ? 0 : 1;
return res;
}
u32 menuSetupBootSlot(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) term_con;
const u32 slot = param & 0xF;
char* res_path = NULL;
char* start = NULL;
// if bit4 of param is set, reset slot and return
if (param & 0x10)
{
configDeleteKey(KBootOption1Buttons + slot);
configDeleteKey(KBootOption1 + slot);
return 0;
}
if (configDataExist(KBootOption1 + slot))
start = (char*) configGetData(KBootOption1 + slot);
res_path = (char*) malloc(FF_MAX_LFN + 1);
if (!res_path) panicMsg("Out of memory");
ee_printf_screen_center("Select a firmware file for slot #%lu.\nPress [HOME] to cancel.", slot + 1);
updateScreens();
u32 res = 0;
if (menuFileSelector(res_path, menu_con, start, "*firm*", true))
res = (configSetKeyData(KBootOption1 + slot, res_path)) ? 0 : 1;
free(res_path);
return res;
}
u32 menuSetupBootKeys(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
const u32 y_center = 7;
const u32 y_instr = 21;
const u32 slot = param & 0xF;
// don't allow setting this up if firm is not set
if (!configDataExist(KBootOption1 + slot))
return 0;
// if bit4 of param is set, delete boot keys and return
if (param & 0x10)
{
configDeleteKey(KBootOption1Buttons + slot);
return 0;
}
hidScanInput();
u32 kHeld = hidKeysHeld();
while (true)
{
// build button string
char button_str[80];
keysToString(kHeld, button_str);
// clear console
consoleSelect(term_con);
consoleClear();
// draw input block
term_con->cursorY = y_center;
ee_printf(ESC_SCHEME_WEAK);
ee_printf_line_center("Hold button(s) to setup.");
ee_printf_line_center("Currently held buttons:");
ee_printf(ESC_SCHEME_STD);
ee_printf_line_center(button_str);
ee_printf(ESC_RESET);
// draw instructions
term_con->cursorY = y_instr;
ee_printf(ESC_SCHEME_WEAK);
if (configDataExist(KBootOption1Buttons + slot))
{
char* currentSetting =
(char*) configCopyText(KBootOption1Buttons + slot);
if (!currentSetting) panicMsg("Config error");
ee_printf_line_center("Current: %s", currentSetting);
free(currentSetting);
}
ee_printf_line_center("[HOME] to cancel");
ee_printf(ESC_RESET);
// update screens
updateScreens();
// check for buttons until held for ~1.5sec
u32 kHeldNew = 0;
do
{
// check hold duration
u32 vBlanks = 0;
do
{
GFX_waitForEvent(GFX_EVENT_PDC0, true);
if(hidGetPowerButton(false)) return 1;
hidScanInput();
kHeldNew = hidKeysHeld();
if(hidKeysDown() & KEY_SHELL) sleepmode();
}
while ((kHeld == kHeldNew) && (++vBlanks < 100));
// check HOME key
if (kHeldNew & KEY_HOME) return 1;
}
while (!((kHeld|kHeldNew) & 0xfff));
// repeat checks until actual buttons are held
if (kHeld == kHeldNew) break;
kHeld = kHeldNew;
}
// if we arrive here, we have a button combo
u32 res = (configSetKeyData(KBootOption1Buttons + slot, &kHeld)) ? 0 : 1;
return res;
}
u32 menuLaunchFirm(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
char path_store[FF_MAX_LFN + 1];
char* path;
// select & clear console
consoleSelect(term_con);
consoleClear();
if (param < N_BOOTSLOTS) // loading from bootslot
{
// check if bootslot exists
if (!configDataExist(KBootOption1 + param))
{
ee_printf("Bootslot does not exist!\n");
goto fail;
}
path = (char*) configGetData(KBootOption1 + param);
}
else if (param == 0xFF) // user decision
{
ee_printf_screen_center("Select a firmware file to boot.\nPress [HOME] to cancel.");
updateScreens();
path = path_store;
if (!menuFileSelector(path, menu_con, NULL, "*firm*", true))
return 1;
// back to terminal console
consoleSelect(term_con);
consoleClear();
}
// try load and verify
ee_printf("\nLoading %s...\n", path);
s32 res = loadVerifyFirm(path, false);
if (res < 0)
{
ee_printf("Firm %s error code %li!\n", (res > -8) ? "load" : "verify", res);
goto fail;
}
ee_printf("\nFirm load success, launching firm..."); // <-- you will never see this
g_startFirmLaunch = true;
// store the bootslot
u32 slot = (param < N_BOOTSLOTS) ? (param + 1) : 0;
storeBootslot(slot);
return 0;
fail:
ee_printf("\nFirm launcher failed.\n\nPress B or HOME to return.");
updateScreens();
outputEndWait();
return 1;
}
u32 menuBackupNand(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
(void) param;
s32 error = 0;
u32 result = 1;
// select & clear console
consoleSelect(term_con);
consoleClear();
// ensure SD mounted
if (!fsEnsureMounted("sdmc:"))
{
ee_printf("SD not inserted or corrupt!\n");
goto fail;
}
// get NAND size (return value in sectors)
const s64 nand_size = fGetDeviceSize(FS_DEVICE_NAND) * 0x200;
if (!nand_size) panicMsg("NAND size is zero");
// console serial number
char serial[0x10] = { 0 }; // serial from SecureInfo_?
if (!fsQuickRead("nand:/rw/sys/SecureInfo_A", serial, 0xF, 0x102) &&
!fsQuickRead("nand:/rw/sys/SecureInfo_B", serial, 0xF, 0x102))
ee_snprintf(serial, 0x10, "UNKNOWN");
// current state of the RTC
u8 rtc[8] = { 0 };
I2C_readRegBuf(I2C_DEV_MCU, 0x30, rtc, 8); // ignore the return value
// create NAND backup filename
char fpath[64];
ee_snprintf(fpath, 64, NAND_BACKUP_PATH "/%02X%02X%02X%02X%02X%02X_%s_nand.bin",
rtc[6], rtc[5], rtc[4], rtc[2], rtc[1], rtc[0], serial);
ee_printf(ESC_SCHEME_ACCENT1 "Creating NAND backup:\n%s\n" ESC_RESET "\nPreparing NAND backup...\n", fpath);
updateScreens();
// open file handle
s32 fHandle;
if (!fsCreateFileWithPath(fpath) ||
((fHandle = fOpen(fpath, FS_OPEN_EXISTING | FS_OPEN_WRITE)) < 0))
{
ee_printf("Cannot create file!\n");
goto fail;
}
// reserve space for NAND backup
ee_printf("NAND size: %lli MiB\nBuffer size: %lu kiB\nReserving space...\n",
nand_size / 0x0100000, (u32) DEVICE_BUFSIZE / 0x400);
updateScreens();
if ((fLseek(fHandle, nand_size) != 0) || (fTell(fHandle) != nand_size))
{
fClose(fHandle);
fUnlink(fpath);
ee_printf("Not enough space!\n");
goto fail;
}
// setup device read
s32 devHandle = fPrepareRawAccess(FS_DEVICE_NAND);
if (devHandle < 0)
{
fClose(fHandle);
fUnlink(fpath);
ee_printf("Cannot open NAND device (error %li)!\n", devHandle);
goto fail;
}
// setup device buffer
s32 dbufHandle = fCreateDeviceBuffer(DEVICE_BUFSIZE);
if (dbufHandle < 0)
panicMsg("Out of memory");
// all done, ready to do the NAND backup
ee_printf("\n");
for (s64 p = 0; p < nand_size; p += DEVICE_BUFSIZE)
{
s64 readBytes = (nand_size - p > DEVICE_BUFSIZE) ? DEVICE_BUFSIZE : nand_size - p;
s32 errcode = 0;
if (!(p % (DEVICE_BUFSIZE*4)))
ee_printf_progress("NAND backup", PROGRESS_WIDTH, p, nand_size);
updateScreens();
if ((errcode = fReadToDeviceBuffer(devHandle, p, readBytes, dbufHandle)) != 0)
{
ee_printf("\nError: Cannot read from NAND (%li)!\n", errcode);
goto fail_close_handles;
}
if ((errcode = fsWriteFromDeviceBuffer(fHandle, p, readBytes, dbufHandle)) != 0)
{
ee_printf("\nError: Cannot write to file (%li)!\n", errcode);
goto fail_close_handles;
}
// check for user cancel request
if (userCancelHandler(true))
{
fFinalizeRawAccess(devHandle);
fFreeDeviceBuffer(dbufHandle);
fClose(fHandle);
fUnlink(fpath);
return 1;
}
}
// NAND access finalized
ee_printf_progress("NAND backup", PROGRESS_WIDTH, nand_size, nand_size);
ee_printf("\n" ESC_SCHEME_GOOD "NAND backup finished.\n" ESC_RESET);
result = 0;
fail_close_handles:
if ((error = fFinalizeRawAccess(devHandle)))
ee_printf("Failed closing NAND handle (error %li)!\n", error);
fFreeDeviceBuffer(dbufHandle);
fClose(fHandle);
fail:
ee_printf("\nPress B or HOME to return.");
updateScreens();
outputEndWait();
if (result != 0) fUnlink(fpath);
hidScanInput(); // throw away any input from impatient users
return result;
}
u32 menuRestoreNand(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
bool forced = param; // if param != 0 -> forced restore
s32 error = 0;
u32 result = 1;
// select & clear console
consoleSelect(term_con);
consoleClear();
// check dev mode
if (forced && (!configDataExist(KDevMode) || !(*(bool*) configGetData(KDevMode)))) {
ee_printf("Forced restore is not available!\nEnable dev mode to get access.\n");
goto fail;
}
// ensure SD mounted
if (!fsEnsureMounted("sdmc:"))
{
ee_printf("SD not inserted or corrupt!\n");
goto fail;
}
// get NAND size (return value in sectors)
const s64 nand_size = fGetDeviceSize(FS_DEVICE_NAND) * 0x200;
if (!nand_size) panicMsg("NAND size is zero");
ee_printf_screen_center("Select a NAND backup for restore.\nPress [HOME] to cancel.");
updateScreens();
char fpath[FF_MAX_LFN + 1];
if (!menuFileSelector(fpath, menu_con, NAND_BACKUP_PATH, "*.bin", false))
return 1; // canceled by user
// select & clear console
consoleSelect(term_con);
consoleClear();
// ask the user for confirmation
if (forced)
{
if (!askConfirmation(ESC_SCHEME_BAD "WARNING:" ESC_RESET "\nYou're about to force-restore a NAND image to\nyour system. Doing this with an incompatible\nNAND image will **BRICK** your console! Make\nsure you backed up your important data!")) return 1;
}
else
{
if (!askConfirmation(ESC_SCHEME_BAD "WARNING:" ESC_RESET "\nYou're about to restore a NAND image to\nyour system. Make sure you have backups of\nyour important data!")) return 1;
}
consoleClear();
// check NAND backup (when not forced)
if (!forced && (fVerifyNandImage(fpath) != 0))
{
ee_printf("%s\nNot a valid NAND backup for this 3DS!\n", fpath);
goto fail;
}
ee_printf(ESC_SCHEME_ACCENT1 "Restoring NAND backup:\n%s\n" ESC_RESET "\nPreparing NAND restore...\n", fpath);
updateScreens();
// open file handle
s32 fHandle;
if ((fHandle = fOpen(fpath, FS_OPEN_EXISTING | FS_OPEN_READ)) < 0)
{
ee_printf("Cannot open file (error %li)!\n", fHandle);
goto fail;
}
// setup device read
s32 devHandle = fPrepareRawAccess(FS_DEVICE_NAND);
if (devHandle < 0)
{
fClose(fHandle);
fUnlink(fpath);
ee_printf("Cannot open NAND device (error %li)!\n", devHandle);
goto fail;
}
// setup device buffer
s32 dbufHandle = fCreateDeviceBuffer(DEVICE_BUFSIZE);
if (dbufHandle < 0)
panicMsg("Out of memory");
// check file size
const s64 file_size = fSize(fHandle);
ee_printf("File size: %lli MiB\n", file_size / 0x100000);
ee_printf("NAND size: %lli MiB\n", nand_size / 0x100000);
ee_printf("Buffer size: %lu kiB\n", (u32) DEVICE_BUFSIZE / 0x400);
updateScreens();
if (file_size > nand_size)
{
ee_printf("Size exceeds available space!\n");
goto fail_close_handles;
}
// setup NAND protection
bool protected = !forced;
if (fSetNandProtection(protected) != 0)
panicMsg("Set NAND protection failed.");
ee_printf("NAND protection: %s\n", protected ? "enabled" : "disabled");
// all done, ready to do the NAND backup
ee_printf("\n");
for (s64 p = 0; p < file_size; p += DEVICE_BUFSIZE)
{
s64 readBytes = (file_size - p > DEVICE_BUFSIZE) ? DEVICE_BUFSIZE : file_size - p;
s32 errcode = 0;
if (!(p % (DEVICE_BUFSIZE*4)))
ee_printf_progress("NAND restore", PROGRESS_WIDTH, p, file_size);
updateScreens();
if ((errcode = fReadToDeviceBuffer(fHandle, p, readBytes, dbufHandle)) != 0)
{
ee_printf("\nError: Cannot read from file (%li)!\n", errcode);
goto fail_close_handles;
}
if ((errcode = fsWriteFromDeviceBuffer(devHandle, p, readBytes, dbufHandle)) != 0)
{
ee_printf("\nError: Cannot write to NAND (%li)!\n", errcode);
goto fail_close_handles;
}
// check for user cancel request
// cancel is forbidden(!) here, but we need to handle force poweroff
if (userCancelHandler(false))
{
fFinalizeRawAccess(devHandle);
fFreeDeviceBuffer(dbufHandle);
fClose(fHandle);
return 1;
}
}
// NAND access finalized
ee_printf_progress("NAND restore", PROGRESS_WIDTH, file_size, file_size);
ee_printf("\n" ESC_SCHEME_GOOD "NAND restore finished.\n" ESC_RESET);
result = 0;
fail_close_handles:
if ((error = fFinalizeRawAccess(devHandle)))
ee_printf("Failed closing NAND handle (error %li)!\n", error);
fFreeDeviceBuffer(dbufHandle);
fClose(fHandle);
fail:
ee_printf("\nPress B or HOME to return.");
updateScreens();
outputEndWait();
return result;
}
u32 menuInstallFirm(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
char firm_drv[8] = { 'f', 'i', 'r', 'm', '0' + param, ':', '\0' };
char firm_path[FF_MAX_LFN + 1];
u32 result = 1;
// clear console
consoleSelect(term_con);
consoleClear();
// check dev mode
if (!configDataExist(KDevMode) || !(*(bool*) configGetData(KDevMode))) {
ee_printf("Install firmware is not available!\nEnable dev mode to get access.\n");
goto fail;
}
// file selector
ee_printf_screen_center("Select a firmware file to install.\nPress [HOME] to cancel.");
updateScreens();
if (!menuFileSelector(firm_path, menu_con, NULL, "*firm*", true))
return 1; // cancel by user
// select and clear console
consoleSelect(term_con);
consoleClear();
// ask the user for confirmation
if (!askConfirmation(ESC_SCHEME_BAD "WARNING:" ESC_RESET "\nYou're about to install a firmware to %s.\nFlashing incompatible firmwares may lead to\nunexpected results.", firm_drv)) return 1;
consoleClear();
ee_printf(ESC_SCHEME_ACCENT1 "Flashing firmware to %s:\n%s\n" ESC_RESET "\nLoading firmware... ", firm_drv, firm_path);
updateScreens();
s32 res = loadVerifyFirm(firm_path, false);
if (res < 0)
{
ee_printf(ESC_SCHEME_BAD "failed!\n" ESC_RESET);
ee_printf("Firm %s error code %li!\n", (res > -8) ? "load" : "verify", res);
goto fail;
}
ee_printf(ESC_SCHEME_GOOD "OK\n" ESC_RESET "Flashing firmware... ");
updateScreens();
res = writeFirmPartition(firm_drv, true);
if (res != 0)
{
ee_printf(ESC_SCHEME_BAD "failed!\n" ESC_RESET);
ee_printf("Firm flash error code %li!\n", res);
goto fail;
}
ee_printf(ESC_SCHEME_GOOD "OK\n" ESC_RESET);
ee_printf(ESC_SCHEME_GOOD "\nFirm was flashed to %s.\n" ESC_RESET, firm_drv);
result = 0;
fail:
ee_printf("\nPress B or HOME to return.");
updateScreens();
outputEndWait();
return result;
}
u32 menuUpdateFastboot3ds(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) param;
char firm_path[FF_MAX_LFN + 1];
u32 result = 1;
// file browser dialogue
consoleSelect(term_con);
consoleClear();
ee_printf_screen_center("Select fastboot3DS update file.\nPress [HOME] to cancel.");
updateScreens();
if (!menuFileSelector(firm_path, menu_con, "sdmc:", "*firm*", true))
return 1; // cancel by user
// verify and install update
consoleSelect(term_con);
consoleClear();
ee_printf(ESC_SCHEME_ACCENT1 "Updating fastboot3DS from file:\n%s\n" ESC_RESET "\nLoading firmware... ", firm_path);
updateScreens();
u32 version = 0;
s32 res = loadVerifyUpdate(firm_path, &version);
if (res != 0)
{
ee_printf(ESC_SCHEME_BAD "failed!\n" ESC_RESET);
switch ( res )
{
case UPDATE_ERR_INVALID_FIRM:
ee_printf("Firm validation failed.\n");
break;
case UPDATE_ERR_INVALID_SIG:
ee_printf("Not a fastboot3DS update firmware.\n");
break;
case UPDATE_ERR_DOWNGRADE:
ee_printf("A newer version is already installed.\n");
break;
case UPDATE_ERR_NOT_INSTALLED:
ee_printf("Update is not possible.\n");
break;
default:
ee_printf("Update error code %li!\n", res);
break;
}
goto fail;
}
ee_printf(ESC_SCHEME_GOOD "v%lu.%lu\n" ESC_RESET "Flashing firmware... ", (version >> 16) & 0xFFFF, version & 0xFFFF);
updateScreens();
res = writeFirmPartition("firm0:", true);
if (res != 0)
{
ee_printf(ESC_SCHEME_BAD "failed!\n" ESC_RESET);
ee_printf("Firm flash error code %li!\n", res);
goto fail;
}
ee_printf(ESC_SCHEME_GOOD "OK\n" ESC_RESET);
ee_printf(ESC_SCHEME_GOOD "\nfastboot3DS was updated.\n" ESC_RESET);
result = 0;
fail:
ee_printf("\nPress B or HOME to return.");
updateScreens();
outputEndWait();
return result;
}
u32 menuShowCredits(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
(void) param;
// clear console
consoleSelect(term_con);
consoleClear();
// credits
term_con->cursorY = 2;
ee_printf(ESC_SCHEME_ACCENT0);
ee_printf_line_center("Fastboot3DS Credits");
ee_printf_line_center("===================");
ee_printf_line_center("");
ee_printf(ESC_SCHEME_STD);
ee_printf_line_center("Main developers:");
ee_printf(ESC_SCHEME_WEAK);
ee_printf_line_center("derrek");
ee_printf_line_center("profi200");
ee_printf_line_center("d0k3 (menu code)");
ee_printf_line_center("");
ee_printf(ESC_SCHEME_STD);
ee_printf_line_center("Thanks to:");
ee_printf(ESC_SCHEME_WEAK);
ee_printf_line_center("yellows8");
ee_printf_line_center("plutoo");
ee_printf_line_center("smea");
ee_printf_line_center("Normmatt (for sdmmc code)");
ee_printf_line_center("WinterMute (for console code)");
ee_printf_line_center("ctrulib devs (for HID code)");
ee_printf_line_center("Luma 3DS devs (for fmt.c/gfx code)");
ee_printf_line_center("mtheall (for LZ11 decompress code)");
ee_printf_line_center("devkitPro (for the toolchain/makefiles)");
ee_printf_line_center("");
ee_printf_line_center("... everyone who contributed to 3dbrew.org");
updateScreens();
// Konami code
const u32 konami_code[] = {
KEY_DUP, KEY_DUP, KEY_DDOWN, KEY_DDOWN, KEY_DLEFT, KEY_DRIGHT, KEY_DLEFT, KEY_DRIGHT, KEY_B, KEY_A };
const u32 konami = sizeof(konami_code) / sizeof(u32);
u32 k = 0;
// handle user input
u32 kDown = 0;
do
{
GFX_waitForEvent(GFX_EVENT_PDC0, true);
if(hidGetPowerButton(false)) // handle power button
break;
hidScanInput();
kDown = hidKeysDown();
if (kDown) k = (kDown & konami_code[k]) ? k + 1 : 0;
if (!k && (kDown & KEY_B)) break;
if (kDown & KEY_SHELL) sleepmode();
}
while (!(kDown & KEY_HOME) && (k < konami));
// Konami code entered?
if (k == konami)
{
const bool enabled = true;
configSetKeyData(KDevMode, &enabled);
consoleClear();
term_con->cursorY = 10;
ee_printf(ESC_SCHEME_ACCENT1);
ee_printf_line_center("You are now a developer!");
ee_printf(ESC_RESET);
ee_printf_line_center("");
ee_printf_line_center("Access to developer-only features granted.");
updateScreens();
outputEndWait();
}
return 0;
}
u32 menuDummyFunc(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
// clear console
consoleSelect(term_con);
consoleClear();
// print something
ee_printf("This is not implemented yet.\nMy parameter was %lu.\nGo look elsewhere, nothing to see here.\n\nPress B or HOME to return.", param);
updateScreens();
outputEndWait();
return 0;
}
/*
u32 debugSettingsView(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
(void) param;
// clear console
consoleSelect(term_con);
consoleClear();
ee_printf("Config has changed: %s\n", configHasChanged() ? "true" : "false");
ee_printf("Write config: %s\n", writeConfigFile() ? "success" : "failed");
ee_printf("Load config: %s\n", loadConfigFile() ? "success" : "failed");
// show settings
for (int key = 0; key < KLast; key++)
{
const char* kText = configGetKeyText(key);
const bool kExist = configDataExist(key);
ee_printf("%02i %s: %s\n", key, kText, kExist ? "exists" : "not found");
if (configDataExist(key))
{
char* text = (char*) configCopyText(key);
ee_printf("text: %s / u32: %lu\n", text, *(u32*) configGetData(key));
free(text);
}
}
updateScreens();
// wait for B / HOME button
do
{
GFX_waitForEvent(GFX_EVENT_PDC0, true);
if(hidGetPowerButton(false)) // handle power button
return 0;
hidScanInput();
}
while (!(hidKeysDown() & (KEY_B|KEY_HOME)));
return 0;
}
u32 debugEscapeTest(PrintConsole* term_con, PrintConsole* menu_con, u32 param)
{
(void) menu_con;
(void) param;
// clear console
consoleSelect(term_con);
consoleClear();
ee_printf("\x1b[1mbold\n\x1b[0m");
ee_printf("\x1b[2mfaint\n\x1b[0m");
ee_printf("\x1b[3mitalic\n\x1b[0m");
ee_printf("\x1b[4munderline\n\x1b[0m");
ee_printf("\x1b[5mblink slow\n\x1b[0m");
ee_printf("\x1b[6mblink fast\n\x1b[0m");
ee_printf("\x1b[7mreverse\n\x1b[0m");
ee_printf("\x1b[8mconceal\n\x1b[0m");
ee_printf("\x1b[9mcrossed-out\n\x1b[0m");
ee_printf("\n");
for (u32 i = 0; i < 8; i++)
{
char c[8];
ee_snprintf(c, 8, "\x1b[%lu", 30 + i);
ee_printf("color #%lu: %smnormal\x1b[0m %s;2mfaint\x1b[0m %s;4munderline\x1b[0m %s;7mreverse\x1b[0m %s;9mcrossed-out\x1b[0m\n", i, c, c, c, c, c);
}
// wait for B / HOME button
do
{
updateScreens();
if(hidGetPowerButton(false)) // handle power button
return 0;
hidScanInput();
}
while (!(hidKeysDown() & (KEY_B|KEY_HOME)));
return 0;
}
*/
